The following share the knowledge that I will post is how to cope with the water pump does not come out of the water.
Unlike the usual water pump running normally, when used within a fair old machine pumps roughly half an hour, the water is not coming out-get out, usually when I whipped out the pipe pull top to bottom place just fits in the casting, because I think there is usually a sand clogging the water not so smoothly, and when I shake the sand out with water, but this did not come out. After I couldn't shake my check on the pipe connection pipe connection there turned out to be a leak, there's a gap opening in connection, I so remember when a service water pump leaking water not say if can get out of such a language, said ngempos, I try to cover wear rubber tires apparently tetep leaked too, after I bought a new connection and the glue I try installing itself turns out to be.
So in conclusion may be taken when the water does not come out because there is a leak in the connection pipe, when pipes are leaking, the water can't get out, because the water pump so ngempos sucking wind so that water doesn't get out. If you're still not out of the water it is possible problem on the water pump. For your water pump problem big jumble on the expert handyman service water pump.
The share of knowledge today may help. Thank You.